Portland Cement
- Mix with various aggregates and water to produce a concrete mixture.
- Mix proportions by weight:
- 10 kg Portland Cement
- 20 kg Sand
- 30 kg KING ½" Gravel
Bagged Cement
Concrete, mortar, sand and specialty mixes, plus aggregates — bagged and ready for the job.
Ready Mix Products
Concrete Mix
- for a thickness of 5.08 cm (2") or more
- for concrete slabs, walks, floors, patios, steps, footings, and setting posts and poles
- available in 30 kg bags
- also called Stone Mix
- coverage: One half of a cubic foot
Mortar Mix
- for laying brick, concrete block or field stone
- for repairing masonry joints
- available in 30 kg bags
- Type N and type S available
- coverage: see Technical Data Sheet
Sand Mix
- for a thickness of less than 5.08 cm (2")
- for filling cracks in concrete
- grouting between flagstone
- for smoothing and topping
- available in 30 kg bags
- coverage: see Technical Data Sheet
Parging Mix
- for parging concrete blocks or poured concrete
- easy trowelling
- superior bonding
- use above and below ground
- available in 25 kg bags
- 1 x (bag) = 42 sq. ft. @ 1/8" approx
Rapid Post
- for rapid setting of posts
- sets in minutes
- pour from bag to hole
- for below grade use only
- available in 30 kg bags
- coverage: see Technical Data Sheet
Non-Shrink Grout
- Can be mixed and placed from dry pack, plastic and fluid consistencies using relatively low water/cement ratios.
- Excellent pumpability.
- Improved resistance to water washout.
- Achieves hardened properties in a wide range of temperature conditions.
- Very low permeability.
- Non-corrosive, non-chloride, non-metallic.
- Excellent resistance to freeze-thaw cycling and salt-scaling in the presence of de-icing salts.
- All King products are manufactured using ISO 9001:2008 Certified Processes
Stone Veneer Mortar
- High bond strength
- Superior workability
- Increased compressive strength
- Pre-blended, reducing mixing time on jobsite and increasing productivity
- Manufactured to meet the ISO 9001:2000 Quality Standards
- For bonding brick and cultured stone to a variety of surfaces
- Can be used in both indoor and outdoor applications
Top n' Bond
- High bond strength
- Superior workability
- Increased compressive strength
- Pre-blended, reducing mixing time on jobsite and increasing productivity
- Manufactured to meet the ISO 9001:2000 Quality Standards
- For bonding brick and cultured stone to a variety of surfaces
- Can be used in both indoor and outdoor applications
Portland and Masonary Cements
Masonry Cement
- Mix with sand to produce a mortar for bricks and blocks for load bearing walls.
- Mix proportions by weight for TYPE S Mortar + 10 kg Type S Masonry Cement + 25 kg Sand
Sand
Construction
- a "fine" natural mortar sand
- use for mortar mix, sand mix and grouting
- available in 30 kg bags
- volume approx. 1 bag = 24" x 12" x 4" (compact)
Gravel
- natural crushed stone ranging in size from 3/8" to 1/2"
- use for concrete mix, water drainage and driveways
- available in 30 kg bags
- volume approx. 1 bag = 24" x 12" x 4" (2/3 cu. ft.)
All Purpose
- a thoroughly washed and flame dried sand
- use for icy sidewalks, displays, greasy areas, pet boxes, cigarette urns, soil conditioner
- this is also a high grade concrete sand
- available in 30 kg bags
- volume approx. 1 bag = 24" x 12" x 4" (compact)
Play Sand
- a high quality natural beach sand
- ideal for building castles
- available in 20 kg bags
- 5 bags = 9 sq. ft. x 3" deep
Limestone Screenings
- provides an excellent base for interlocking brick and patio slabs
- discourages growth of weeds and ant colonies
- available in 30 kg bags
- volume approx. 1 bag = 24" x 12" x 4" (compact)
Permasand
- quick setting polymer sand for filling joints between interlocking pavers and slabs simply sweep over joints, mist with water and allow to harden available in 25 kg bags 1 bag covers approx. 50 to 100 sq. ft.(4.64m² to 9.29m²) depending on joint size and compaction maximum joint width: PermaSand "Grey" up to 1" (2.6 cm)
Sonotube
- Prefabricated fibre tube.
- Use as a form to produce round concrete supports.
- Designed for below ground placement. Can be used up to 3 ft. above ground but bracing is required above 2 ft.
- Available in 8 ft. lengths (6", 8", 10" & 12" diameters), nested in sets of 3.
- Available in 12 ft. lengths (6", 8", 10", 12", 16", 18" & 24" diameters).
Plastic Forms
Bigfoot Systems® pier footing forms are pre-molded bell-shaped footings - functionality at its finest - used for:
- Decks & patios
- Screened porches & verandahs
- Homes, mobile & prefab homes
- Cottages & camps
- Additions, gazebos & ramps
- Carports & garages
- Barns & sheds
- Sun rooms
Footing Tube
- Lightweight form designed to eliminate frost from lifting concrete piers.
- For decks or additions
- Easy to use, place in ground, backfill around, fill with concrete
- Tapered design
- Inspector friendly
- Suitable in extreme conditions
- 3 Sizes Available: Deck Tube, 8" Footing Tube, 10/12" Footing Tube
- 6” DECK TUBE – CONCRETE FORM - For small decks (less than 8’ spans), steps, wheel chair ramps, and chain link fence post supports
- 8” FOOTING TUBE – CONCRETE FORM - Supports for decks, cottages and additions
- 10/12” FOOTING TUBE – CONCRETE FORM - Supports for larger structures, pole barns, tarp buildings. For use with posts up to 8”X8”. Large gate supports to resist lateral loads
- FTB30 – FOOTING TUBE BASE - Used under 8” & 10/12” Footing Tube to increase load bearing area. Gives 90% more load bearing capacity for weaker soils & heavy loads
Get a Quote
Request a quote or ask a question
Tell us about your project and our team will get back to you as soon as possible.
Related Products
Explore more building supplies
Cottage Country Building Supplies
Looking for bagged cement?
Drop by the yard or get in touch — our team will help you choose the right products and get them to your site.